Digital Audio at Last…
Thinking Digitally by Steve Macatee
In this article, Steve Macatee…
Room Modeling Details
How much detail should a virtual room model include? Some say "the more the better," yet others say that "less is better." This controlled study sheds some light on the subject. Warning: This article may permanently affect the way that you model rooms. Measured and modeled data included.
Target SPL and Required Amplifier Size
Sound system designers must calculate sound pressure level from given loudspeaker/amplifier specifications. Here are the steps, presented in a logical and intuitive manner.
Basic Definitions of Integrating SPL Meters
A Do-it-Yourself Guide to Computing the Speech Transmission Index
By Farrel Becker
In this article, Farrel Becker shares the steps…
Dynamic Range – More Bits, More Footroom
By Steve Barbar
In this article, Steve Barbar addresses the term…
Piezo Magic – Accurate Gain Structure Using a Common Device
By Pat Brown
Pat Brown will show you a way to set gain structure…
The Forward-Referenced Interface
Tips and Tricks by Rick ChinnConnecting computers into audio…
Sound System Designers Site Surveys – Three things to Consider
By Pat Brown
Sound System Designers site surveys should include…
Reductions in Speech Modulation
By Pat BrownThe Speech Transmission Index is a measure of the…